| PLACE | TIME | LIST |
|---|---|---|
|
ACT CITY HAMAMATSU Room #44 |
15:00-18:00 | Registration desk open |
| ACT CITY HAMAMATSU Room #44 |
16:00-18:00 | ACT CITY HAMAMATSU Room #44 Welcome Party |
Nov. 14th (Mon) Room S: 4F RoomA-C:5F
| PLACE | TIME | LIST | |||
|---|---|---|---|---|---|
| ACT CITY HAMAMATSU |
8:40 | Registration desk open | |||
| ACT CITY HAMAMATSU 4F Room #41 |
9:30 | Opening Address | |||
| 9:40 | Plenary Session I (Keynote Speech I) Dr. Sinan Badrawy (Chief Technical Officer Moore Tool / Moore Nanotechnology Systems) Error Budgeting Analysis for Determining Axis Configurations of Ultra Precision Jig Grinding Machines |
||||
| 10:50 | Plenary Session I (Keynote Speech II) Prof. Atsushi Matsubara (Department of Micro Engineering, Kyoto University) Measurement Technologies for the Development of Robust and Smart Machine Tools |
||||
| 11:40-13:30 | Lunch | ||||
| ACT CITY HAMAMATSU 5F |
Room | Room A @Room# 52 | Room B @Room# 53 | Room C @Room# 54 | |
| Session | MEMS /NEMS Chairman: (Prof. Kazuo Sato) |
Additive Manufacturing and 3D Printing Chairman: (Prof. Hiroyuki Sasahara) (Prof. Toshiyuki Horiuchi) |
Advanced Precision Machining and Technologies I Chairman: (Prof. Hidetake Tanaka) |
||
| 13:30 | A101-8196: A Study on Micro-actuator using a Laminate Film of Conductive Polymer and Ionic Gel Arata KANEKO, Masato KAWANABE, Takashi AOTO |
B101-8096: Fabrication of Micro-Lens Arrays Utilizing Lithographically Replicated Concave Resist Patterns Noa KOBAYASHI, Ryunosuke SASAKI, Toshiyuki HORIUCHI |
C101-8218: Effect of Parallel Micro-grooves Fabricated on the Rake and Flank Faces on the Improvement of the Cutting Performance of Low-rigidity Elastomers Jun SHINOZUKA, Yuichi IMAKAMA |
||
| 13:50 | A102-8164: Efficient Fabrication Method of Ordered Metal Nanodot Array by Transferring to Plastic Films Satoshi NAKAJIMA, Motoki TERANO, Masahiko YOSHINO |
B102-8201: Micro Three-dimensional Fabrication using Local Electrophoresis Deposition Assist with a Laser Trapping Technique Coupling with a Spatial Light Modulator Toshiki MATSUURA, Takanari TAKAI, Futoshi IWATA |
C102-8198: Reduction in Microscopic Surface Defects of cBN Tool with Short-pulse Laser Processing and Its Improvement of Cutting Performance for Hardened Steel Ryosuke USUI, Fumihiro ITOIGAWA, Kohei KATO, Takashi NAKAMURA |
||
| 14:10 | A103-8141: Nanoscale Patterning of Silicon in Water Using Catalytically Active Platinum Coated AFM Probe Kota YAMAMOTO, Junji SASANO, Moeto NAGAI, Takayuki SHIBATA |
B103-8177: Fabrication of Functional Microstructures by Multi-beam Interference Lithography Using Evanescent Light Yuki SUZUKI, Kunikazu SUZUKI, Masaki MICHIHATA, Kiyoshi TAKAMASU, Satoru TAKAHASHI |
C103-8200: Feasibility Study on High Speed Machining of Cast Iron with Sharpened Cutting Tool Formed by Short Pulse Laser Kohei KATO, Fumihiro ITOIGAWA, Ryusuke USUI, Takashi NAKAMURA |
||
| 14:30 | Development of Digital Acoustic Emission Sensor used by LiNbO3 Kazuo MUTO, Yukihiro MIURA, Akira IMAI, Masanori YACHI |
Mechanical Property of the Fabricated Object Using Nickel-based Alloy in Wire and Arc-based Additive Manufacturing Shuhei TAKIZAWA, Yoshikazu NAKANO, Shinji TSUKAMOTO, Hiroyuki SASAHARA |
C104-8111: Topographic Features of Wheel Working Surface and Grinding Force Distributions in Creep Feed Grinding Masakazu FUJIMOTO, Susumu OHISHI, Ryosuke HINAGA, Yuki KUBO |
||
| 14:50 | A105-8255: Piezoelectricity Improvement of BaTiO3 Thin Film by Additive Element Search Method Using First-Principles Calculation Yutaka YASODA, Yasutomo UETSUJI, Kazuyoshi TSUCHIYA |
B105-8223: Development of a Cooperative System For Wire and Arc-based Additive Manufacturing and Machining Hideaki NAGAMATSU, Yuusuke MITSUTAKE, Tuyoshi HAMAMOTO, Hiroyuki SASAHARA |
C105-8104: Grinding Feed Control Based on Prediction of Workpiece Deflection Makoto TANO, Masashi YORITSUNE |
||
| 15:10-15:30 | Coffee break | ||||
| ACT CITY HAMAMATSU 5F |
Room | Room A @Room# 52 | Room B @Room# 53 | Room C @Room# 54 | |
| Session | Bio-Medical Engineering and Application Chairman: (Prof. Masaya Takasaki) (Dr. Moeto Nagai) |
Advanced Precision Machining and Technologies II Chairman: (Prof. Jun Shinozuka) |
Advanced Precision Machining and Technologies III Chairman: (Dr. Masakazu Fujimoto) |
||
| 15:30 | A106-8133: Microfluidic Generation of Satellite-Free Droplets through a Deterministic Lateral Displacement Array Naotomo TOTTORI, Takasi NISISAKO, Yasuko YANAGIDA, Takeshi HATSUZAWA |
B106-8165: Elucidation of ECM phenomena based on the direct observation using transparent electrode Fuchen CHU, Masanori KUNIEDA |
C106-8156: Optimization of Milling by use of Radius End-mill for CFRTP Boring Hidetake TANAKA, Mitsuru KITAMURA |
||
| 15:50 | A107-8187: The Effect of the Micro Shapes on Growing Dendrites of Cultured Neuronal Cells Masashi KOIZUMI, Akira KAKUTA, Shigeru AOMURA, Hiromichi NAKADATE |
B107-8174: Electrochemical Machining with Porous Electrode Fabricated by Additive Manufacturing Ryota IGUSA, Tomohiro KOYANO, Tatsuaki FURUMOTO, Akira HOSOKAWA, Yohei HASHIMOTO |
C107-8169: Basic Study for Ball End Milling of Ultra High Molecular Weight Kousuke SHINTOKU, Hirohisa NARITA |
||
| 16:10 | A108-8262: Assay for Measuring Passive Drug Permeability through Artificial Planer Lipid Bilayers in a Microfluidic Chamber Takasi NISISAKO, Yuta MIYAGAWA, Takeshi HATSUZAWA |
B108-8167: Study on Micro EDM Deposition in Ar Atmosphere Itaru TAKAHAMA, Takeyuki YAMAMOTO, Jun SHIMIZU, Libo ZHOU, Teppei ONUKI, Hirotaka OJIMA |
C108-8150: Mirror Surface Machining of Die Steel by Elliptical Vibration Cutting with Diamond Coated Tools Sharpened by Pulse Laser Grinding Hiroshi SAITO, Hongjin JUNG, Eiji SHAMOTO, Shinya SUGANUMA, Fumihiro ITOIGAWA |
||
| 16:30 | A109-8235: Evaluation method of Refugee Assistance Robots by the Data Accumulated in the Social Experiments Shigeru ASANO, Masanori WADA, Tomomasa SATO, Hiroshi HOSAKA |
Cancel B109-8236: Sanjay AGARWAL |
C109-8246: Effect of Stable Saw-tooth Chip Formation on Depth-of-Cut Notch wear in Ni-based Heat-Resistant Alloy Cutting Ruiqiang YE, Fumihiro ITOIGAWA, Takashi NAKAMURA |
||
| 16:50 | A110-8143: Development of Test Dummies for Durability Test of Exoskeletontyped Physical Assistant Robots for Lower Extremities Keiko HOMMA |
B110-8175: On Removal of Chromium from Used Electrolyte in ECM Processs Yonghua ZHAO, Masanori KUNIEDA, Nobuaki OBI, Shunjiro WATANABE |
C110-8106: Relationship between Solution/Glass Interfacial Area Specific Resistivity and Glass Polishing Properties using Ceria Abrasives Taku SUGIMOTO, Seiichi SUDA, Koichi KAWAHARA |
||
| 17:10 | A111-8178: Measurement and Analysis on Head Motion and Mouse Operation of the User Working with Multi Displays Makoto SUZUKI |
C111-8207: Planarization for Translucent Polycrystalline Alumina by Surface Polishing Technique Syuhei KUROKAWA, Leo HIRASHIMA, Terutake HAYASHI, Keiichiro WATANABE, Hiroyuki TSUJI, Tomoki NAGAE |
|||
Nov. 15th (Tue.)Room S and Poster: 4F, RoomA-C: 5F, Banquet: Hotel Okura HAMAMATSU
| PLACE | TIME | LIST | |||
|---|---|---|---|---|---|
| ACT CITY HAMAMATSU |
8:40 | Registration desk open | |||
| ACT CITY HAMAMATSU 4F Room #41 |
|||||
| 9:20 | Plenary Session II (Keynote Speech III) Prof. Hans Nørgaard Hansen (Department of Mechanical Engineering, Technical University of Denmark) Quality in Micro Manufacturing - From Product Design to Process Chains |
||||
| 10:20 | Plenary Session II (Keynote Speech IV) Dr. Haruyoshi Toyoda, ( Central Research Laboratory, Hamamatsu Photonics K. K) Application of Liquid Crystal on Silicon Spatial Light Modulator |
||||
| 11:20 | Plenary Session II (Keynote Speech V) Mr. Keiichiro Watanabe (NGK INSULATORS, LTD.,) Precision Forming and Machining Technologies for Ceramics Based Components |
||||
| 12:10-13:30 | Lunch | ||||
| ACT CITY HAMAMATSU 5F |
Room | Room A @Room# 52 | Room B @Room# 53 | Room C @Room# 54 | |
| Session | Die and Mold Manufacturing Chairman: (Prof. Masanori Kunieda) Machine Tools and Elements I Chairman: (Dr.Yasunori Sakai) |
Digital Design and Manufacturing Systems I Chairman: (Prof. Hideki Aoyama) |
Advanced Precision Machining and Technologies IV Chairman: (Dr. Yohei Yamada) |
||
| 13:30 | A201-8259: Developed Micro Ball Forming Device to Produce Microtexture on Curved Surface Takeshi NAKANO, Koki MAEDA, Minoru OTA, Kai EGASHIRA, Keishi YAMAGUCHI, Yoshitaka UEHARA |
B201-8195: Construction of Virtual Printed-Circuit Assembly Lines Using an E-Catalogue Library of Machines Sota MATSUMOTO, Naoaki NOYAMA, Michiko MATSUDA | C201-8227: Effect of Structural Design and Infused Lubricant of Self-cleaning Surfaces on Durability Against Mechanical Contact Nobuyuki MORONUKI, Nguyen PHAN |
||
| 13:50 | A202-8241: Proposal of Tip Burnishing Process using Coated Carbide Tool Masayoshi SHINYA, Masato OKADA, Hiroaki KOZUKA, Hiroshi TACHIYA, Naoki ASAKAWA, Masaaki OTSU |
B202-8091: Segmentation and Recognition of Pole-like Objects from Mobile Laser Scanning Data Keisuke KOHIRA, Kenta FUKANO, Hiroshi MASUDA |
C202-8225: Deposition of TiC Layers on Ni-based Composite Coatings by Pulsed Electrical Discharging in Oil Tsunehisa SUZUKI |
||
| 14:10 | A203-8116: Injection Speed Dependence on Shear Strength of Metal-polymer Direct Joining Shotaro KADOYA, Fuminobu KIMURA, Yusuke KAJIHARA |
B203-8191: Segmentation and Reconstruction of Tree Shapes from Large-Scale Point-Clouds Kazuto SAITO, Hiroshi MASUDA |
C203-8168: High-efficiency and High-precision Flatness Correction of Quartz Glass Substrate by Numerically Controlled Vacuum Plasma Chemical Vaporization Machining Shogo SAKAIYA, Daisuke FUNATO, Katsuyoshi ENDO, Kazuya YAMAMURA |
||
| 14:30 | A204-8114: Proposal and Evaluation of On-machine Measurement System in Machining Centers by Acoustic Emission Technique Toshihiko KOGA, Alan HASE, Keiichi NINOMIYA, Masaki WADA, Hiroshi MISHINA, Katsuyuki KONISHI |
B204-8190: Mobile Laser Scanning System for Capturing Point-Clouds of Engineering Plants Masaya SUZUKI, Takeru NIWA, Kiichiro ISHIKAWA, Hiroshi MASUDA |
C204-8261: Precise Correction of Cylindrical Shape by Numerically Controlled Plasma Chemical Vaporization Machining Yuiki GOTO, Yuuki KOBAYASHI, Katsuyoshi ENDO, Dai YAMAZAKI, Ryuji MARUYAMA, Hirotoshi HAYASHIDA, Kazuhio SOYAMA, Kazuya YAMAMURA |
||
| 14:50 | A205-8146: Geometric Error Compensation of Five-axis Machining Centers based on On-machine Workpiece Measurement Ryuta SATO, Hironori KASHIWAGI and Keiichi SHIRASE |
5B205-8265: Development of Laser Trimming CAM for Printed Electrode Naoki ASAKAWA, Hiroyuki TSUJI, Akihiro MIZUTANI |
C205-8238: Study on UV-assisted grinding of SiC Toshiyuki KOTSUJI, Takahiro ISHIBASHI, Minoru OTA, Kai EGASHIRA, Keishi YAMAGUCHI, Masayoshi YAMADA, Masahiro ITOI |
||
| 15:10-15:30 | Coffee break | ||||
| ACT CITY HAMAMATSU 5F |
Room | Room A @Room# 52 | Room B @Room# 53 | Room C @Room# 54 | |
| Session | Machine Tools and Elements II Chairman: (Dr. Yasunori Sakai) (Prof. Ryuta Sato) |
Digital Design and Manufacturing Systems II Chairman: (Prof. Naoki Asakawa) |
Advanced Precision Machining and Technologies V Chairman: (Prof. Hayato Yoshioka) |
||
| 15:30 | A206-8138: Development of Direct Drive Motor Based on Quality Engineering for Machine Tools and its Effect on Machine Performance Takakazu IKEGAMI, Toshiki HIROGAKI, Eiichi AOYAMA |
B206-8170: A Proposal of Selection Method for Temperature Measurement in End-Milling Dongjin WU, Koji TERAMOTO |
C206-8155: Laser Cutting Out Process for Semiconductor Substrates Applying Laser Slicing Method Yohei YAMADA, Yohei KANEKO, Riku AOKI, Junichi IKENO |
||
| 15:50 | A207-8253: Dynamic characteristics of a Hybrid guide system with a Slideway and Rolling elments Isao OSHITA |
B207-8162: Development of CAM system for 5-axis controlled machining using Haptic Device −Tool path generation in consideration of removal amount per unit time− Tomoya KAKOI,Koichi MORISHIGE |
C207-8107: Development of Ductile mode grooving with PCD(Poly-Crystalline Diamond) Blade. Yasuo IZUMI, Takashi FUJITA, Hisashi MINAMI, Takeru TSUTSUI, Junji WATANABE, Mutsumi TOUGE |
||
| 16:10 | A208-8268: Experimental Measurement of Heat Transfer Characteristics between Contacting Surfaces in Loaded and Vacuum Atmosphere Osamu Takeyama, Haruhisa Sakamoto, Masashi Kikuchi, Michio Ishikawa, Masanori Hashimoto, Kazuyuki Tomizawa, Naoki Takahashi, Boogoan Choi |
B208-8130: Optimization of Robot Program with Consideration of Manipulability and Workpiece Placement Yuta SATO, Koichi MORISHIGE |
C208-8115: Surface Integrity Improvement in Fixed-abrasive Diamond Wire Slicing of Single-crystal Silicon Takaaki SUZUKI, Yuki NISHINO, Jiwang YAN |
||
| 16:30 | A209-8158: Influence of Designing Parameters on Vibration Damping of Rolling Guideway Yasunori SAKAI, So FUKASAWA, Zhu JIANG, Hayato YOSHIOKA, Tomohisa TANAKA, Kaoru HOSHIDE, Ryuji FURUSAWA |
Cancel B209-8258: Cancel Kazuhiro SAKITA |
C209-8224: Stress Analysis of LT Wafer during Grinding Process Wentong LU, Libo ZHOU, Jun SHIMIZU, Teppei ONUKI, Hirotaka OJIMA, Takeyuki YAMAMOTO |
||
| 16:50 | A210-8136: Machining of Difficult-to-Machine Materials by PVD coated End Mills Goushi HOSHINO, Testuo FUJIMOTO, Akira HOSOKAWA, Tatsuaki FURUMOTO, Tomohiro KOYANO |
B210-8127: Study on Machining Conditions Based on Data-Mining from Radius End-mill Tool Catalog Data Kengo KUBO, Toshiki HIROGAKI, Eiichi AOYAMA, Hiroyuki KODAMA |
C210-8180: Machining of Aspheric Glass Lens with Diamond Grinding Head Guangygo DONG, Jianyun SHEN, Lang LU, Xipeng XU |
||
| ACT CITY HAMAMATSU Room# 41 |
17:20-18:30 | Poster session >>Click! see the details<< |
|||
| Hotel Okura HAMAMATSU |
19:00-21:00 | BanquetHotel Okura HAMAMATSU 4F (HEIAN Large Banqueting Hall) | |||
Poster Session Nov. 15th (TUE.) 17:20-18:30
ACT CITY HAMAMATSU Room# 41
ACT CITY HAMAMATSU Room# 41
| No. | Title / Author |
|---|---|
| P01-8099 Cancel | Uncertainty in length conversion for length measurement using a comb laser interferometer Dong WEI, Masato AKETAGAWA |
| P02-8109 | Fluorescent spherical marker for precise 3D coordinate measurement Kazuya OGASAWARA, Kenji TERABAYASHI, Takaaki OIWA |
| P03-8160 | Measurement stability improvement of passive extendable strut equipped with laser interferometer length measurement system Yukio NAKAZAWA, Takaaki OIWA, Kenji TERABAYASHI, Junichi ASAMA |
| P04-8163 | Kinematic calibration for three-degree-of-freedom parallel manipulator based on 3D-ball plate and touch probe Ibuki MORI, Takaaki OIWA, Kenji TERABAYASHI, Junichi ASAMA |
| P05-8256 | Development of Compact Range Image Sensor with Multi-Slit Laser Projector that Uses Disparity and Blur Yi FENG, Ayase ITAGAKI, Gakuto MASUYAMA, Kazunori UMEDA |
| P06-8157 | Modifiable Tool Path Generation using Surface Parameter-based Method Hiroya HAMAMATSU, Yoshitaka MORIMOTO, Keigo TAKASUGI, Naoki ASAKAWA |
| P07-8193 | Calculation of Tooth Root Stress and Deformation for Asymmetric Spur Gears by Two-Dimensional Elastic Theory Ryo FUJIKAWA, Kiyotaka IKEJO, Kazuteru NAGAMURA, Ranganathan PRASHANNAK KUMAR |
| P08-8203 | High Efficiency Integrally Shaping from Simplicity Material by 5-axis Controlled Machining Makoto YAMADA, Tsukasa KONDO, Kai WAKASA |
| P09-8219 | Evaluation of Tool Path Based on Energy Consumption Simulation for Motion Control of Three-axis Machining Zen KIMURA, Akio HAYASHI, Yohichi NAKAO |
| P10-8264 | Application of Open CAM Kernel “Kodatuno” -Development of tool path generation method with lower calculation cost- Takumi SHIMIZU, Naoki ASAKAWA, Keigo TAKASUGI |
| P11-8093 | Optimization for 3D device patterning in projection optics Seiro Murakami, Yasuko Yanagida, Takeshi Hatsuzawa |
| P12-8211 | Manufacturing of the Impact Strain Testing Device for Cultured Neuronal Cells Controlling their Growth Direction Naoya ASHIHARA, Akira KAKUTA, Hiromichi NAKADATE, Shigeru AOMURA |
| P13-8118 | Characterization of double cell system with halogen and LED illumination for fabrication of porous silicon substrates Jongho PARK Yasuko YANAGIDA, Takeshi HATSUZAWA |
| P14-8153 | Operability Evaluation of Six-D.o.F Surgical Assist Arm with Sphere Joints and Inner-Outer Cables Toshihiro YUKAWA, Youichi TAKEDA, Toru KAGA, Jun SASAKI |
| P15-8213 | Performance of Direct Photosynthesis Fuel Cell with Micro Shape on Electrode Surface by Using Purple Photosynthetic Bacteria Kai INOGUCHI, Akira KAKUTA, Toshitake TATENO |
| P16-8226 | Deformation Simulation of Aluminum Alloy Mold for Manufacturing Large Size and Thin-Walled Product by Injection Molding Makoto Nikawa, Keisuke Hatanaka, Hiroko Kondo, Tadashi Furuhashi, Shoji Higuchi, Hiroaki Nanya |
| P17-8243 | Study on Constant-Pressure Process by using Mounted Wheel with Coarse cBN Grain for Cold Work Tool Steel Ryunosuke SATO, Yusuke YANO, Hideo UENO |
| P18-8135 | Development of a Next-Generation Transport and Positioning Device Ryo OZONO, Yoshiyasu TAKASE, Shogo MAKINO, Hiroshi NAKAMURA |
| P19-8154 | Development of Mechanical Combined-Type CVT consisting of Closed Links, Grooved Cam and Non-Invertible Elements Toshihiro YUKAWA, Youichi TAKEDA, Toru KAGA, Shuzo OHSHIMA |
| P20-8192 | Study on the mechanism of titanium oxide layer growth by laser irradiation on titanium Shunsuke HOTTA, Jiang ZHU,Hayato YOSHIOKA,Tomohisa TANAKA |
| P21-8237 | Deposition of the a-BCN film formed from tri-methylborazine Nasa KAWAGOSHI, Masayuki NAKANO, Tetsuya YAMAMOTO, Junko HIEDA, Naoto OHTAKE, Hiroki AKASAKA |
| P22-8092 | Development of a Small Hovering Robot Stickable to a Wall Using a Sucker Shungo IKEDA, Tetsuya ODA, Toshiyuki HORIUCHI |
| P23-8139 | Development of numerical control unit for dynamic characteristics compensation Keisuke KUMAGAI, Yoshitaka Morimoto, Keigo TAKASUGI |
| P24-8161 | Positioning Accuracy Improvement of Active Magnetic Suspension Using Zero-Phase Current Yusuke FUJII, Junichi ASAMA, Takaaki OIWA, Akira CHIBA |
| P25-8171 | Motion of a 3-DOF inchworm using piezoelectric actuator and electromagnet Yuta MITSUYOSHI , Kento TANAKA , Akihiro TORII , Kae DOKI, Suguru MOTOTANI |
| P26-8185 | Filter Design of Adjusting Common Phase for Vibration Suppression Control of Multi-degrees of Freedom System Hiroshi HAMAMATSU, Toshiyuki TACHIBANA, Yasunobu HITAKA, Seiji FURUNO, Takayuki MATSUO, Shigeru FUTAMI |
| P27-8248 | Development of micro manipulator system driven by parallel wires under tension force control Taketo SENDA, Chisato KANAMORI, Hisayuki AOYAMA |
| P28-8249 | Design and control of magnetically driven handheld XY micro-manipulator Daisuke ISHIKO, Hisayuki AOYAMA, Sungwan BOKSUWAN |
| P29-8251 | Multi axes linear manipulation system for automatic sewing operation Hirofumi TAKAHASHI, Hisayuki AOYAMA, Chisato KANAMORI |
| P30-8231 | Development of An Energy Feedback Gyro Generator Yoshinori OONISHI, Hiroshi ARAI, Hiroshi HOSAKA |
| P31-8101 | Combined Process of Cutting and Laser Peen Forming with Femtosecond Laser －Improvement of Bending Accuracy for Micro Parts－ Yoshihiro SAGISAKA, Kiyomitsu YAMASHITA, Hiroyasu UETA |
| P32-8105 | High precision ball-end milling based on a geometric analysis of the cutting mechanism Hisanobu TERAI, Teruyuki ASAO, Koichi KIKKAWA, Yoshio MIZUGAKI |
| P33-8148 | Effect of Calcination Temperature on Performance of CeO2 Abrasive for Glass Polishing Toshimasa Suzuki, Koichi Kawahara |
| P34-8151 | Stability investigation of laser ablation micromachining on ferroelectric lithium niobate substrates －Fact-finding and probing into the cause of failures in the process－ Kazuki KAMOSHIDA, Teppei ONUKI, Takeyuki YAMAMOTO, Hirotaka OJIMA, Jun SHIMIZU, Libo ZHOU |
| P35-8152 | Fundamental Study on Local Nano-processing by Potential Control in Acidic Solutions Gota YAMAGUCHI, Takehiro KUME, Hidekazu MIMURA |
| P36-8240 | Cutting performance of the coated cemented carbide in driven rotary cutting of hardened steel Noriyuki TAKASE, Hideharu KATO, Yoshitaka MORIMOTO, Kazuyuki KUBOTA, Naohiko SUZUKI |
| P37-8254 | Laser packaging for thin films with ultra-thin glass Yuko AONO, Tatsuro SADANAGA, Atsushi HIRATA, Hitoshi TOKURA |
| P38-8103 | Fundamental Study on Cutting State Monitoring by Acoustic Emission Technique: Relationship between AE Signals and Cutting Phenomena Observed by High-speed Camera Hengshan GAO, Alan HASE, Susumu KOBAYASHI |
| P39-8112 | Investigation of Magnetic Polishing Method using Ball-Nose Tool with a Four Axis Controlled Machine Tool Wataru YAGUCHI, Lei MA1, Tatsuya FURUKI , Toshiki HIROGAKI, Eiichi AOYAMA |
| P40-8119 | Dynamic Performance of Feed Driving System with a Right and Left Coaxial Ball Screw and its Application to Machine Tools Masahiro KISHIMOTO, Toshiki HIROGAKI, Eiichi AOYAMA, Tastuya YAMASHITA, Keiji OGAWA |
| P41-8147 | Formation of superhard c-BN films on the body and edge of cutting tools by reactive plasma-assisted coating (RePAC) Masao Noma, Michiru Yamashita, Koji Eriguchi, Shigehiko Hasegawa |
| P42-8184 | Estimating thermal deformation for multi-tasking machine Kenichi NAKANISHI, Jiro SAKAMOTO |
| P43-8194 | Study on High Efficiency Cutting of SiC-based Ceramic Matrix Composites -Application of Diamond Coated Carbide End Mill－ Yuya TANABE, Tatsuaki FURUMOTO, Suguru MORI, Yohei HASHIMOTO, Tomohiro KOYANO, Akira HOSOKAWA, Masaharu YANO |
| P44-8212 | Trial study on pitching and vertical displacement control of water driven stage Satoshi SHIBATA, Akio HAYASHI, Yohichi NAKAO |
| P45-8217 | Corrosion resistance of Si-doped amorphous carbon film to nitric acid Jumpei NISHIKAWA, Masayuki NAKANO, Junko HIEDA, Naoto OHTAKE, Hiroki AKASAKA |
| P46-8182 | Magnetic Force Assisted Laser Additive Manufacturing of Ferromagnetic Micro-Parts Yuko AONO, Kentaro TAMURA, Atsushi HIRATA |
| P47-8252 | In-process measurement for micro-stereolithography using surface plasmon resonance Masaki MICHIHATA, Satoru TAKAHASHI, Kiyoshi TAKAMASU |
| P48-8260 | Ultrasonic Vibration-Assisted Extrusion of Metal Powder Suspension for Additive Manufacturing Toshitake TATENO, Akira KAKUTA, Hayate OGO |
Nov. 16th (Wed.) Room A-C: 5F
| PLACE | TIME | LIST | |||
|---|---|---|---|---|---|
| ACT CITY HAMAMATSU 5F |
8:40 | Registration desk open | |||
| ACT CITY HAMAMATSU 5F |
Room | Room A @Room# 52 | Room B @Room# 53 | Room C @Room# 54 | |
| Session | Precision Measurement and Calibration I Chairman: (Dr. Soichi Ibaraki) |
Green and Sustainable Manufacturing and Technologies Chairman: (Prof. Hiroyuki Hiraoka) Digital Design and Manufacturing Systems I Chairman: (Prof. Koichi Morishige) |
Advanced Precision Machining and Technologies VI Chairman: (Prof. Yasuhiro Kakinuma) |
||
| 9:00 | A301-8102: A Feasibility Study on Cost Effective, Ultrahigh Accuracy Angular Encoder System Based on the Principle of the effortless calibration with Multi Detecting Head Nobuyuki ISHII, Kayoko TANIGUCHI, Kazuo YAMAZAKI, Hideki AOYAMA |
B301-8216: Part agent’s Support for Disassembly of Mechanical Product Atsushi NAGASAWA, Hiroyuki HIRAOKA |
C301-8129: Micro Drilling on Thin Wire Masaki SERIZAWA, Takashi MATSUMURA |
||
| 9:20 | A302-8144: Computer Simulation on the Optical Configuration of an Ultra-sensitive Angle Sensor Based on Laser Autocollimation Yuki SHIMIZU, Taiji MARUYAMA, Yuan-Liu CHEN, So ITO, Wei GAO |
B302-8134: Development of a Low-Energy Consumption Wearable Wrist Warming Device -Temperature Control Method for Sustainable Thermal Sensation- Guillaume LOPEZ, Takahiro TOKUDA, Naoya ISOYAMA, Hiroshi HOSAKA, Kiyoshi ITAO |
C302-8250: Micro Burr Formation in Ultra-fine Grooving Ryuichi KOBAYASHI, Shohei TERAOKA, Shun TAKAYANAGI, Shaolin XU, Keita SHIMADA, Masayoshi MIZUTANI, Tsunemoto KURIYAGAWA |
||
| 9:40 | A303-81455: Angle Detection by Using a Continuously Rotating Gyro for Large Scale Profile Shape Evaluation Tatsuya KUME, Masanori SATOH, Tsuyoshi SUWADA, Kazuro FURUKAWA, Eiki OKUYAMA |
B303-8117: Driving Performance of a Green Gear of Pure Bamboo Fibers Extracted using a Machining Center Atsushi HASHIMOTO, Toshiki HIROGAKI, Eiichi AOYAMA |
C303-8206: Fabrication of Micro Rods by EDM Using High Electric Resistance Electrode Yuki SUGATA, Tomohiro KOYANO, Akira HOSOKAWA, Tatsuaki FURUMOTO, Yohei HASHIMOTO |
||
| 10:00 | A304-8123: In-line 3D cutting tool-wear measurement Janez KOPAC, Luka CERCE, Franci PUSAVEC |
B304-8239: Extraction of Thin Shape of Part Using Distance Field Masatomo INUI, Takuya IWANAMI, Nobuyuki UMEZU |
C304-8202: Development of a Localized Atmospheric Pressure Plasma Jet for Surface Treatments using a Scanning Nanopipette Probe Microscope Daisuke MORIMATSU, Hiromitsu SUGIMOTO, Atsushi NAKAMURA, Akihisa OGINO, Masaaki NAGATSU, Futoshi IWATA |
10:20 | Coffee break | ACT CITY HAMAMATSU 5F |
Room | Room A @Room# 52 | Room B @Room# 53 | Room C @Room# 54 |
| Session | Precision Measurement and Calibration II Chairman: (Dr. Tatsuya Kume) |
Digital Design and Manufacturing Systems II Chairman: (Prof. Koichi Morishige) |
Advanced Precision Machining and Technologies VII Chairman: (Prof. Takashi Matsumura) |
||
| 10:40 | A305-8142: Friction Analysis between Carbon Fibre Reinforced Plastic and Diamond Coating with Cutting Process Tribometer Robert VOSS, Marcel HENERICHS, Cristoph WALCH, Friedrich KUSTER, Konrad WEGENER |
B305-8137: 5-Axis Control Finishing Suppressing Tool Wear Soushi UCHIKATA, Anthony BEAUCAMP, Yoshimi TAKEUCHI | C305-8183: Study on Low Power Laser Processing Technique with Instant Surface Excitation using Femtosecond Double Pulse Terutake HAYASHI, Keigo MATSUNAGA, Syuhei KUROKAWA, Hideaki YOKOO, Noboru HASEGAWA, Masaharu NISHIKINO, Takayuki KUMADA, Tomohiro OTOBE, Youji MATSUKAWA, Yasuhiro TAKAYA |
||
| 11:00 | A306-8179: Error characteristics analyses in optical wafer-thickness measurements Teppei ONUKI, Yuki NEMOTO, Hirotaka OJIMA, Jun SHIMIZU, Libo ZHOU |
B306-8257: Design Method of Optimum Assembly Processes Plan Using Assembly CAD Data Ryo Handa, Hideki Aoyama, Noriaki Sano |
C306-8159: Two- Phase Modelling and Tool Shape Determination for Electrochemical Machining Garg MAYANK，Masanori KUNIEDA |
||
| 11:20 | A307-8210: Optical Detection of Fine Particulate Defects with Autonomous Search-and-split Liquid Probe -Characteristics analysis of optical detection- Kazuki TACHIBANA, Shohei ASAI, Masaki MICHIHATA, Kiyoshi TAKAMASU, Satoru TAKAHASHI |
B307-8095: Proposal of a CAPP System for Multi-tasking Machine Tools Dealing with Complicatec Machining Operations Yuki INOUE, Kenta KOREMURA, Keiichi NAKAMOTO |
C307-8094: Development of an alternative lapping tool by the application of compressed short-metal fibers Yuji KAWAHATA, Okiharu KIRINO, Yu ZHANG, Yasuhiro TANI |
||
| 11:40 | A308-8267: Surface Profilmetry with Nano-structure using Spectroscopic Mueller Matrix Polarimeter and Boundary Element Method Shin NINOMIYA, Shuhei SHIBATA, Yo KAMATA, Jun-ichiro SUGISAKA, Yukitoshi OTANI |
B308-8097: A Study on Probe Path Generation for 5-axis Control On-machine Measurement Takuya TAMURA, Keiichi NAKAMOTO, Yoshimi TAKEUCHI |
C308-8242: Mechanical Characteristic Identification of Workpiece by Applying Sensor-less Micro-tool Contact Detection with Ultra-precision Machine Satoko NAGAKARI, Sangkee MIN, Yasuhiro KAKINUMA | ||
| 12:00-13:00 | Lunch | ||||
| ACT CITY HAMAMATSU 5F |
Room | Room A @Room# 52 | Room B @Room# 53 | Room C @Room# 54 | |
| Session | Precision Measurement and Calibration III Chairman: (Dr. Shin Usuki) |
Control and Ultra Precision Positioning Chairman: (Prof.Hiroshi Hosaka) |
Advanced Precision Machining and Technologies VIII Chairman: (Dr. Terutake Hayashi) |
||
| 13:00 | A309-8128: Estimation of Position and Posture of Industrial Robot with a Laser Tracker for Recreating Space Technology for Pipe Joint Manufacturing System Shoki Yamauchi, Toshiki Hirogaki, Eithi Aoyama, Koichi Mori, Kenichi Takahashi, Masaki Huruta |
B309-8121: Jerk Limited High Speed Cornering for CNC Machines with Controlled Contour Error Shingo TAJIMA, Burak SENCER |
C309-8173: Metal-polymer Direct Joining with Abrasive Blasted Metals Yuta TAMURA, Fuminobu KIMURA, Eiji YAMAGUCHI, Naotake NAKURA, Yusuke KAJIHARA |
||
| 13:20 | A310-8140: Software Development to Analyze the Machining Test for the Identification of Rotary Axis Error Motions on Five-axis Machine Tools Soichi IBARAKI, Shota TSUJIMOTO, Yu NAGAI, Yasutaka SAKAI, Shigeki MORIMOTO, Yosuke MIYAZAKI |
B310-8122: Contact and Friction Behavior of Rolling Element in Linear Bearing -Approach for estimation of force and relative velocity in the contact area- Matthias REUSS, Taku SAKAI, Atsushi MATSUBARA |
C310-8172: Highly-efficient Pit-free and Slurryless Finishing of GaN by Plasma-assisted Polishing Chika KAGEYAMA, Hui DENG, Katsuyoshi ENDO, Kazuya YAMAMURA |
||
| 13:40 | A311-8188: Development of Precision Length Measurement System using a Micro-probe for Micro-slit of the Slot Die Coater So Ito, Yuanliu Chen, Hirotaka Kikuchi, Ryo Kobayashi, Yuki Shimizu, Wei Gao, Kazuhiko Takahashi, Toshihiko Kanayama, Kunmei Arakawa, Atsushi Hayashi |
B311-8124: Identification of Transfer Functions of Subsystems Matthias REUSS, Stefanie APPRICH |
C311-8176: Investigation of determining factor of etching rate of single crystal diamond in plasma chemical vaporization machining Hisaya DOJO, Katsuyoshi ENDO, Hideaki YAMADA, Akiyoshi CHAYAHARA, Yoshiaki MOKUNO, Kazuya YAMAMURA |
||
| 14:00 | A312-8209: Non-contact Precision Profile Measurement to Rough Surface Objects with Optical Frequency Combs Fuminori KIMURA, Taro ONOE, Satoru TAKAHASHI, Kiyoshi TAKAMASU, Hirokazu MATSUMOTO |
B312-8181: Controller Design of a Thin and Compact Linear Switched Reluctance Motor with Strong Nonlinear Driving Characteristics Mohd Nazmin MASLAN, Kaiji SATO |
|||
| 14:20 | A313-8263: Development of New Gauge for Quantification of Uncertainty from Material Influence Kazuya MATSUZAKI, Osamu SATO, Hiroyuki FUJIMOTO, Makoto ABE, Toshiyuki TAKATSUJI |
B313-8230: Stabilization control of bicycle with the gyro actuator on departure Yuichi NAMBU, Taiki TERAMOTO, Ken SASAKI, Hiroshi HOSAKA |
|||
| 14:40-15:00 | Coffee break | ||||
| ACT CITY HAMAMATSU 5F |
Room | Room A @Room# 52 | |||
| Session | Precision Measurement and Calibration IV Chairman: (Dr. Masaki Michihata) |
||||
| 15:00 | A314-8149: Low-coherence interference structured illumination microscopy with a fringe measurement system Takeshi TERAO, Tomohiro TAKADA, Shin USUKI, Kenjiro T. MIURA |
||||
| 15:20 | A315-8166: Development of Advanced Measurement Method of 3D Semiconductor Structure -3D-Profile Measurement of FinFET using CD-SEM and TEM Images- Yuki IWAKI, Kiyoshi TAKAMASU, Satoru TAKAHASHI |
||||
| 15:40 | A316-8186: A Simple 3D Profile Estimation of Through-silicon Vias (TSVs) Based on an X-ray Projection Image and Its Robustness Evaluation Yasutoshi UMEHARA, Nobuyuki MORONUKI |
||||
| 16:00 | A317-8233: Non-Destructive Optical Depth Inspection of Sub-Diffraction Limit Fine Holes -Theoretical analysis of optical responses based on FDTD method- Chengshuo JIN, Masaki MICHIHATA, Kiyoshi TAKAMASU, Satoru TAKAHASHI |
||||